Products

DESCRIPTION

Basic Info.

Model NO.	241123.100
Weight	1.950 Kg [4.3lbs]
Dimensions	109X41.5X327mm
Transport Package	Plywood Case
Specification	Brand New
Trademark	Eltek
Origin	Wuhan
Production Capacity	1000 Sets/Month

Product Description

Rectiverter 48V 230/1500 48/1200 & 115/750 48/600
Doc 241123.100.DS3 - v3
Rectifier & Inverter in one box
Built on HE technology from the Flatpack2 HE rectifier family the Rectiverter 230/1500 48/1200 provides backed up power for 230 VAC loads with minimum losses and footprint.
It is a 3 port device capable of charging the 48V battery and simultaneously provides power for the AC and DC loads.
During mains outage the Rectiverter feeds AC loads using energy stored in the battery.
APPLICATIONS
TELECOM
LTE/4G/WiMAX
Distributed antenna system
Broadband
POWER UTILITIES
Switch tripping and SCADA
Low & High voltage switchgear
Transformer & SUB stations
Power Generation & Distribution
Control & protection
SCADA system
RAILWAY & METRO INFRASTRUCTURE
Signaling and communications
Control centers
MARINE
Communication onboard ships
OTHER
Rural electrification
Specifications

Models / ordering information 230/1500 230/1500 230/1500 115/750 115/750 115/75048/1200 48/150 48/0 48/600 48/75 48/0

Part number 241123.100 241123.101 241123.102 241123.100L 241123.101L 241123.102L

AC OUTPUT DATA

Voltage (default) / (adjustable range) 230 VAC / 200 - 240 VAC 115 VAC / 100 - 127 VAC

Frequency (default inverter mode) 50 Hz (adaptive) 60 Hz (adaptive)

Frequency (set-able inverter mode) 50Hz, 60Hz or last synced 50/60Hz (adaptive), 94-106Hz

Power maximum (continuous / overload (<15s)) 1200 W (1500 VA) / 2000 VA 600 W (750 VA) / 1000 VA

Load sharing ±5% of active power from 10 to 100% load

Current maximum (continuous / overload (<15s)) 6.5 ARMS / 8.7 ARMS

Current (maximum) Quick trip (20ms) 32 A (6 x nominal)

Hold up (Voltage dips) (before switching to battery) 5 ms 5 ms

THD < 1.5 % at resistive load

Protection Fuse in L, Hot pluggable, Varistor

DC OUTPUT DATA

Voltage (default) / (adjustable range) 53.5 VDC / 43 - 58 VDC

Power (maximum @nominal input) 1200 W 1) 150 W 0 W 600 W 1) 75 W 0 W

Current (maximum @VOUT ≤ 48 VDC) 25 A 1) 3.13 A - 12.5 A 1) 1.56 A -

Current sharing (10 - 100% load) ±5% of maximum current from 10 to 100% load

Static Voltage regulation (10 - 100% load) ±0.5%

Dynamic Voltage regulation ±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms

Ripple < 200 mVPP , 30 MHz bandwidth

Protection Short circuit proof, Over voltage shutdown, Reversed polarity, Reversed polarity and Fuse

INPUT DATA

AC Mains Input Voltage (range / LV disconnect) 185 - 275 VAC / 170 VAC 95 - 140 VAC / 85 VAC

AC Current (maximum) 11.5 ARMS 9.1 ARMS 2) 8.2 ARMS 2) 11.3 ARMS 10.1 ARMS 2) 9.2 ARMS 2)

Frequency (default: sync range) 47-53 & 57-63 Hz 47-53 & 57-63 Hz

Frequency (set-able: sync range) 47-53 Hz, 57-63 Hz or both (adaptive)

Power Factor / THD > 0.985 at 50% load or more / < 3.5%

AC Input Protection Fuse in L and N, Hot pluggable, Varistor

DC Voltage nominal / extended range3) 45 - 58 VDC / 40 - 45 VDC

DC Current (maximum) 32 A / 45A during overload (15s) 16 A / 22.5A during overload (15s)

OTHER SPECIFICATION

Efficiency >96% (mains mode), >94% (inverter mode) >92% (mains mode), >91% (inverter mode)

Isolation 3.6 kVDC - ACPorts to PE, 3 kVAC - ACPorts to DCPort/CAN, 710 VDC - DCPort to PE, 60 VDC - DCPort to CAN

Alarms: Red LED Low and high mains input voltage shutdown, High and low temperature shutdown, Rectiverter Failure, Alarm relay [NO max 75 VDC / 100 mA] Overvoltage shutdown on output, Fan failure, Low output voltage alarm, CAN bus failure, Sync bus (AC output OR DC output alarms) lost and Sync fail

Warnings: Yellow LED Rectiverter in power de-rate mode or in power or current limit mode on DC or AC port, Remote output current limit activated, Loss of CAN communication with controller

Normal operation: Green LED AC output and/or DC output on and ok

MTBF (Telcordia SR-332 Iss.I method III (a)) 260 000 hours (@ Tambient : 25 °C)

Operating temperature -40 to +75°C (-40 to +167°F), humidity 5 - 95% RH non-condensing

Temperature de-rating above 55°C (131°F) 1200W to 480W @ 75°C (167°F) for each, AC and DC, outputs (total power 2000W to 800W)

Storage temperature -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing

Dimensions[WxHxD] / Weight 109 x 41.5 x 327mm (4.25 x 1.69 x 13") / 1.95 kg (4.3 lbs)

DESIGN STANDARDS

Electrical safety EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC/EN 62040-1:2008+A1:2013 UL 60950-1:2014, UL1778:2014, C22.2 No. 107.3-14

EMC EN 61000-6-1:2007 / -2:2005 / -3:2007+A1:2010 / -4:2007+A1:2010, EN 62040-2:2006 EN50121-4:2015/-5:2015, ETSI EN 300 386 V.1.6.1, FCC CFR 47 Part 15

2011/65/EU (RoHS) & 2012/19/EU (WEEE) / ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3)Environment Normal operating conditions as per IEC/EN 62040-3:2011 clause 4.2. Other operating conditions as per IEC 62040-3:2011 clause 4.3, must be advised

1) AC load has priority. Maximum available DC output power and current is dependent on 2) If DC port is overloaded pulling the voltage below 43V the input current may increase above this level.instant AC load and AC input voltage; i.e maximum 800W/16.6A at full AC power and nominal 3) Reduced performance - no over load support, and for 200 - 240 VAC output THD will increased and maximum input for 230VAC. output power de-rates (to 970W for 230 VAC @ 40 VDC)

______________________________________________________

1	Rectifier module	Emerson /Vertiv	R48-1800A
2	Rectifier module	Emerson /Vertiv	R48-2000A3
3	Rectifier module	Emerson /Vertiv	R48-2900U
4	Rectifier module	Emerson /Vertiv	R48-3000e3
5	Rectifier module	Emerson /Vertiv	R48-3500e
6	Rectifier module	Emerson /Vertiv	R48-5800A
7	Rectifier module	Huawi	R4850N1
8	Rectifier module	Huawi	R4850G1
9	Rectifier module	Eltek	Flatpack2 48/2000 HE241115.105
10	Rectifier module	Eltek	Flatpack2 48/1000 HE241122.105
11	Rectifier module	Eltek	Flatpack2 48/3000 HE241119.105
12	Rectifier module	Eaton	APR24-3G